Lumidor Impact Pro Multigas Monitor Kit

The Impact Pro like the Impact is rugged, durable and compact. It comes standard with a built-in pump, a disposable/serviceable battery, event/timed datalogging, vibrating alarm and also Safelink Communications Software. Safelink* allows two units to be connected (literally linked together). The "Attendent" at the point of entry to a confined space easily monitors the "Entrant" in the working area via a unique communications link. Communications are continually checked and messages may be passed back and forth to ensure that regulations for working in confined spaces are observed.

Ultra-bright alarm lights and a powerful audible alarm coupled with a periodic green flash and watchdog beep provide user confidence that monitoring is always in operation and alarms are never missed. In addition, Impact uses a large, multi-lingual, backlit display with intuitive menu system to facilitate use and minimize operator training.

This unit can be used with an extension tube probe for testing confined space areas without the need to enter the space. Ask us for these and other accessories.

No Sensor Cartridges included Cartridge sold separately!

The Lumidor Impact Multigas monitor is supplied complete with dry cell battery holders, 4 x AA batteries, belt clip, flow adaptor, multi-lngual quck start guide (printed) and operating instruction on a CD. In addition, the Lumidor Impact Pro is supplied with an integral pump and pump adaptor, a bibrating alarm and is safelink capable.

12 Month Disposable Sensor Cartridge, Order Cartridge Separately

Two types of sensor cartridges are available. The sensor cartridge is an innovative concept that enables the user to simply remove one cartridge and replace it with a new cartridge when a cartridge has expired or a change of detectable gases is required. All cartridges are supplied pre-calibrated with a 12-month warranty. The disposable sensor cartridge is fitted with Oxygen and flammable sensors and combinations of CO and H2S sensors. (OFXX, OFCX, OFXH or OFCH) It can be replaced in under one minute and calibrated in less that two minutes using the Enforcer Calibration Accessory. The serviceable cartridge must contain at least on Non-C or H sensor Individual sensors can be replaced.

Safetlink Cable - 300 Ft. (100M)

Safelink allows two Impact Pro monitors to be connected together such that the gas readings and instrument status form one are repeated on the other. This allows a co-worker in a confined space to be monitored remotely, as well as providing a simple means of passing messages back and forth. "Emergency Assistance" can easily be called by pressing and holding any button.

Call for additional lengths and prices for Safelink Cables!

SafeLink Brochure (.PDF)

Open this file using Acrobat Reader!

Impact Pro Data Sheet (.PDF)

Open this file in Acrobat Reader!

Enforcer - Bump Tester

It is required that "bump" testing be carried out before Any personal gas detector is used. To bump a unit requires exposing each sensor to a known concentration of target gas to confirm that the unit responds accuratley.

Enforcer "bumps and calibrates Impact monitors fitted with any combination of Oxygen, Flammable, Carbon Monoxide, and Hydrogen Sulfide cartridge in under 90 seconds. Strict gas volumes and flow rates allow up to 200 calibrations per cylinder of gas while using the Enforcer. So when you calibrate , you "bump" and when you "bump" you calibrate; in under 90 seconds regardless, thereby remarlably lowering 'bump'/calibration costs permanently.

All calibration information is automatically stored on the impact for comprehensive record keeping. Simple PC software included.

Includes one Cylinder of calibration gas.