Click to enlargeMetal Lathe Machines

Baileigh Industrial’s metal lathe line consists of quality machines with round capacities starting at 13” up to 20” swing over the bed in lengths from 40” up to 80” travel. Each precision metal lathe comes fully guarded with halogen lights, a three jaw chuck, and steady and follow rests. The castings are Meehanite® castings with hardened and ground ways coated with Turcite-B® for long wear life and tighter turning tolerances. Each lathe comes standard with a factory installed Mitutoya DRO (digital read out).

Baileigh gear head metal lathes offer the machinist a very high quality machine with superb features and tight tolerances at reasonable prices. Baileigh carries six models of engine lathes in stock at all times for quick shipments.

Most Tools are shipped LTL, FOB origin (Manitowoc, WI)- please call for frieght quote.

Please call 805-557-1225 for assistance with ordering Baileigh tools and accessories



melama

Click to enlargeGear Head Precision Lathe - PL-1340 2 HP 220 Volt Single Phase 2 HP Gear Head Precision Lathe. 13" Swing Over Bed. 39" Maximum Material Length. 1-1/2" Bore. D1-4" Nose. Tapers: Nose NO. 5 Morse, Sleeve NO. 3 Morse. 8 Step Spindle Baileigh’s PL-1340 metal lathes offer a great solution for small to medium sized machine shops. This gear head metal lathe comes standard with precision ground and hardened ways that are further protected by a Turcite-B® coating offering years of tight tolerances.

Like all Baileigh metal lathes the PL-1340 comes standard with a Mitutoya ®DRO (digital read out) for the power fed X and Y axis. This machine is the perfect machine for turning all types of metals to perfect tolerances. Speed (70 to 2000 RPM). Includes Mitutoyo 2 Axis Digital

Readout System, 6" 3-Jaw Universal Chuck, 6" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Rear Splash Guard, and Halogen Work Light

PL1340$13,743.75
Click to enlargeMetal Lathe - PL-1440The PL-1440 gear head metal lathe has a Mitutoya ®DRO (digital read out) as standard on the power fed X and Y axis. The precision ground and hardened ways are further protected by a Turcite-B® coating, which offers years of protection to the ways when under the most grueling turning conditions.

This gear head metal lathe has an industrial gear system that allows for taping, turning, and polishing with a range of speeds from 40 to 2500 RPM. Many features are standard like the Halogen light, splash guards and much more. This is a great engine lathe for any fabrication or machine shop.

220 Volt Three Phase 3 HP Gear Head Precision Lathe. 14" Swing Over Bed. 40" Maximum Material Length. 1-17/32" Bore. D1-4" Nose. Tapers: Nose NO. 5 Morse, Sleeve NO. 3 Morse. 12 Step Spindle Speed (40 to 2500 RPM). Includes Mitutoyo 2 Axis Digital Readout System, 6" 3-Jaw Universal Chuck, 6" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Rear Splash Guard, and Halogen Work Light

PL1440$17,994.00
Click to enlargeHome > Lathes > PL-1640Metal Lathe Machine - PL-1640220 Volt Three Phase 7-1/2 HP High Speed Precision Lathe. 16" Swing Over Bed. 40" Maximum Material Length. 2-1/16" Bore. D1-6" Nose. Tapers: Nose NO. 6 Morse, Sleeve NO. 4 Morse. 12 Step Spindle Speed (80 to 2000 RPM). Includes Mitutoyo 2 Axis Digital Readout System, 8" 3-Jaw Universal Baileigh’s PL-1640 metal lathe has a heavy Meehanite® casting that will offer decades of profitable service providing very tight tolerances across its 40 inches of useful space between centers. It has a 16” swing over the bed allowing for some very large diameters to be turned.

This gear head lathe consists of a very heavy transmission coupled to a powerful 7-1/2 HP motor allowing for precise speeds between 30 and 2000 RPM. The combination of the two reduces chatter under heavy loads which extend tooling life.

Deep hardening and ground ways coupled to the heavy Meehanite® casting allows heavy cuts and extremely tight tolerances between the centers. Power feeds are tied to the precise DRO showing exact locations for the tightest tolerances in the industry.

All Baileigh engine lathes come standard with a Mitutoyo® 2 Axis Digital Readout System, 8" 3-Jaw Universal Chuck, 8" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Rear Splash Guard, and Halogen Work Light.. Thus, there are no options to add as everything has been factory installed to assure the highest quality on the market.

Chuck, 8" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Rear Splash Guard, and Halogen Work Light

PL1640$22,794.00
Click to enlargeMetal Lathe - PL-1860220 Volt Three Phase 7-1/2 HP High Speed Precision Lathe. 18" Swing Over Bed. 60" Maximum Material Length. 2-3/8" Bore. D1-6" Nose. Tapers: Nose NO. 6 Morse, Sleeve NO. 4 Morse. 12 Step Spindle Speed (80 to 2000 RPM). Includes Mitutoyo 2 Axis Digital Readout System, 8" 3-Jaw Universal Baileigh’s PL-1860 metal lathe is the perfect sized machine for most machine shops with an 18” swing over bed and 60” between centers. A massive Meehanite® casting assures the machinist that this machine will offer decades of quality tolerances.

This gear head lathe has a robust transmission with many different speed combinations allowing for speeds between 80 and 2000 RPM. Coupled with a powerful 7-1/2 HP motor turning at max capacity still allows for heavy cuts to be shaved off of the turned part. This allows for better turned surfaces, faster production, and longer tooling life.

Like all Baileigh metal lathes this one includes as standard the Mitutoyo® 2 Axis Digital Readout System, 8" 3-Jaw Universal Chuck, 8" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Rear Splash Guard, and Halogen Work Light. Thus, there are no other options to include as everything is properly factory installed offering the customer the highest quality finish.

Chuck, 8" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Rear Splash Guard, and Halogen Work Light

PL1860$25,794.00
Click to enlargeMetal Lathe - PL-2080 220 Volt Three Phase 15 HP High Speed Precision Lathe. 20" Swing Over Bed. 80" Maximum Material Length. 3-1/8" Bore. D1-8" Nose. Tapers: Nose NO. 7 Morse, Sleeve NO. 5 Morse. 12 Step Spindle Speed (20 to 1550 RPM). Includes Mitutoyo 2 Axis Digital Readout System, 12" 3-Jaw Universal Chuck, Baileigh’s PL-2080 metal lathe has an ample 20” swing over bed with 80” between centers. A powerful 15HP motor is coupled to a precision gear head system that allows for many gear combinations for speeds from 20 to 1550 RPM.

Like all Baileigh metal lathes this one comes standard with a Mitutoyo® 2 Axis Digital Readout System, 12" 3-Jaw Universal Chuck, 10" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Longitudinal Rapid Traverse, Rear Splash Guard, and Halogen Work Light. This means that there are no options to add, we have them all included which means they were all properly factory installed further instilling a quality finished machine.

10" Back Plate, Coolant System, Steady Rest, Follow Rest, Headstock Chuck Guard with Micro switch, Micrometer Saddle Stop, Longitudinal Rapid Traverse, Rear Splash Guard, and Halogen Work Light

PL2080$39,834.00


Copyright © 1999-2011 All Rights Reserved
Legal Information about this website