  
The SN-F250 Sheet Metal Notcher shear with the blades in the negative position as well as the positive position. Which one you use is based on which part you want to keep, the finished part pulled from the machine (best is Negative) or the dropped piece (best is Positive). Negative cut allows for less deformation on the finished part. Negative cutting clamps the sheet metal down to reduce movement. Positive cutting will want to move the sheet away from the stops allowing for room for error.
Variable angle notchers are fixed in three positions. The pivot point and the end points of each blade is fixed after adjustment to angle is made. This type of rigidity distinguishes this machine from competitors.
The stop guides have dove tail grooves in the tail that allows for a tighter more secure guide setting, allowing our machine more accuracy and repeatability.
The shearing head is the most rigid in the industry because we employ a five-point fixed head. A stable shearing head is very important to blade life, and machine life when notching heavier plate.
These notchers drop the waste into a chute and the chute drops the waste in a bin outside of the machine. Believe it or not, there are some machines on the market where the dropped material goes into a bin in the middle of the machine making the operator have to bend into the machine to take out a heavy bin of scrap to throw out. Thus our machines offer a more ergonomically friendly machine for the operators back.
Our variable angle machines can notch from 30° up to 140°. We can shear a 140° notch in one pass with one drop, some other machines require two cuts resulting in two drops.
220 Volt Three Phase Fixed Angle Corner Notcher for Mild Steel. .236" (6mm) Mild Steel Capacity. Will
Notch Corners up to 8" x 8" at 90 Degrees at a Rate of 58 Strokes Per Minute. Includes Patented Blade
Gap Adjustment that Requires No Adjustment by the Operator
Or
220 Volt Three Phase Fixed Angle Corner Notcher for Stainless Steel. .157" (4mm) Stainless Steel
Capacity. Will Notch Corners up to 8" x 8" at 90 Degrees at a Rate of 58 Strokes Per Minute. Includes
Patented Blade Gap Adjustment that Requires No Adjustment by the Operator.
Call 805-557-1225 for shipping fees for this tool.
|