STONE SEALER #3

STONE SEALER #3 (1 gal.) is a Fluoropolymer Emulsion in water that chemically bonds to form an invisible protective barrier on all types of interior and exterior stone surfaces including marble, granite, slate, limestone and agglomerates.

STONE SEALER #3 is a novel chemical development for sealing stone because it does not contain any silicone polymers which have a tendency to attract oil based stains. Therefore, it will provide superior oil resistance in addition to resistance to water based stains that the traditional sealers provide. STONE SEALER #3 contains less than 0.1% Volatile Organic Compounds (VOC) but it still provides the protection normally associated with high VOC concentration sealers that contain petroleum distillates.

STONE SEALER #3 is absorbed into the interior of the stone where it acts as a repellant to prevent damage while allowing the stone to breathe and release moisture vapors. This provides the stone with protection against oil and water based stains, household acids and alkalis, and the formation of mold and mildew growth all of which can cause discoloration, corrosion and staining.

It is recommended that STONE SEALER #3 is brushed, rolled, sponged or wiped onto the completely cleaned stone surface to be protected. Allow the sealer to be absorbed into the stone for 5-10 minutes then remove excess from the surface with a damp cloth. Apply a second coat using the same procedure. Allow the treated stone to dry completely for 24-48 hours at room temperature. STONE SEALER #3 will cover approx. 2000 Sq. Ft. of polished marble or granite, 500 Sq. Ft. of flamed stone per gallon.

STONE SEALER #3 is a generic sealer which is being supplied directly by the formulating company eliminating expensive marketing and distributor costs which are associated with branded products.

Professionals, please contact us for quantity purchases. We can ship in 55 gallon drums for additional savings!

We offer Free Shipping except for the Quart Size!

No Sales Tax Added to Shipments outside of California!


stonesealer3

Click to enlargeStone Sealer #3 Fluoropolymer Emulsion in Water - QuartNatural Stone Sealer #3 is a fluoropolymer emulsion in water which seals all types of stone surfaces including marble, granite, slate, travertine, limestone and agglomerates which contains <0.1% VOC which means that it can be applied in enclosed or occupied premises where stricter clean air and VOC standards are enforced. It is absorbed into the interior of the stone surface where it acts as a repellant to prevent damage while allowing the stone to breath and release moisture vapors. This provides the stone with protection against water and oil based stains, household acids and alkalis, and the formation of mold and mildew growth all of which can cause discoloration and staining.This product is recommended for the maintenance of all natural stone surfaces after installation.

ss-3guart$69.99
Click to enlargeStone Sealer #3 Fluoropolymer Emulsion in Water - GallonNatural Stone Sealer #3 is a fluoropolymer emulsion in water which seals all types of stone surfaces including marble, granite, slate, travertine, limestone and agglomerates which contains <0.1% VOC which means that it can be applied in enclosed or occupied premises where stricter clean air and VOC standards are enforced. It is absorbed into the interior of the stone surface where it acts as a repellant to prevent damage while allowing the stone to breath and release moisture vapors. This provides the stone with protection against water and oil based stains, household acids and alkalis, and the formation of mold and mildew growth all of which can cause discoloration and staining.This product is recommended for the maintenance of all natural stone surfaces after installation.

ss-3gallon$125.00
Click to enlargeStone Sealer #3 Fluoropolymer Emulsion in Water - 5 GallonNatural Stone Sealer #3 is a fluoropolymer emulsion in water which seals all types of stone surfaces including marble, granite, slate, travertine, limestone and agglomerates which contains <0.1% VOC which means that it can be applied in enclosed or occupied premises where stricter clean air and VOC standards are enforced. It is absorbed into the interior of the stone surface where it acts as a repellant to prevent damage while allowing the stone to breath and release moisture vapors. This provides the stone with protection against water and oil based stains, household acids and alkalis, and the formation of mold and mildew growth all of which can cause discoloration and staining.This product is recommended for the maintenance of all natural stone surfaces after installation.

SS-3-5gal$489.00
Click to enlargeStone Sealer #3 Fluoropolymer Emulsion in Water - DrumNatural Stone Sealer #3 is a fluoropolymer emulsion in water which seals all types of stone surfaces including marble, granite, slate, travertine, limestone and agglomerates which contains <0.1% VOC which means that it can be applied in enclosed or occupied premises where stricter clean air and VOC standards are enforced. It is absorbed into the interior of the stone surface where it acts as a repellant to prevent damage while allowing the stone to breath and release moisture vapors. This provides the stone with protection against water and oil based stains, household acids and alkalis, and the formation of mold and mildew growth all of which can cause discoloration and staining.This product is recommended for the maintenance of all natural stone surfaces after installation.

SS-3-55Gallon$4,699.00
Click to enlargeReturn to BuildMartStore Main Page!


Copyright © 1999-2011 All Rights Reserved
Legal Information about this website